Interval setup bracketing setup, Interval setup, Bracketing setup – Minolta Dimage A1 User Manual

Page 96

Advertising
background image

96

R

ECORDING MENU

INTERVAL SETUP

The parameters for the interval drive mode (p. 66) are set in section 2 of the recording menu (p. 80).

Int. set

Bracket set

Enter

Select “Enter” in the interval-set option in section 2 of
the recording menu. Press the center of the controller
to open the setup screen.

Interval

1 min

No.of frames

2

Start time

No delay

:enter

Int. set

On the setup screen, use the up/down controller keys
to highlight the parameter to be changed and then
press the right controller key. Use the up/down keys to
change the parameter. Use the left controller key to
return to the parameters. Continue until the parameters
are set.

press the center of the controller to complete the operation. The menu button closes the
screen and cancels any changes.

BRACKETING SETUP

0.3 Ev
bracket

0.5 Ev
bracket

Normal

Under

Over

When making an exposure bracket (p. 62), the exposure difference among frames can be set to
0.3EV or 0.5Ev. This is set in section 2 of the recording menu (p. 80).

Advertising