Moffat BLUE SEAL E32D5 - Manual (Page 11)

Operation
9
Using the Oven - Manual Mode
1.
TURN ‘ON’.
Press ‘On-Off’ button.
Temperature Dislay.
Temperature Display will show actual temperature.
2.
SET TEMPERATURE.
+ to increase the temperature.
- to decrease the temperature.
Time Display.
Time Display will show actual time set.
3.
SET TIME.
+ to increase the time.
- to decrease the time.
4.
START TIMER.
Press ‘Start / Stop’ button to start timer operation.
- Press any button, to cancel the ‘Alarm’ .
- Press ‘Steam’ button, to select the Steam mode.
- Press ‘Act Temp’ button, to check ‘Actual’ temperature of oven at any time during cooking.
- Press ‘Light’ button, to turn ‘On’ oven light. (refer - ‘Operator Accessible Parameters’).
- Press ‘Program’ button, to program the Oven refer to the ‘Installation and Operation Manual’
.
- Press and hold ‘On / Off’ button, for 3 seconds to turn ‘Off’ the Oven .
Timer ‘On’
Indicator
Heating ‘On’
Indicator
To check actual oven temperature
during preheat or cooking, press
‘Temperature’ button. Actual
temperature will display briefly on
‘Temperature Display’ before the
display reverts to the pre-set
temperature.
At any time during cooking, time
and temperature can be adjusted
by using the ‘Time’ / ‘Temperature’
controls.
Opening the oven door during a
cooking cycle will pause the
cooking time. To continue
cooking, close the oven door.
This oven can be used without
using the ‘Timer’, as it is purely a
timer and does not control the
baking operation of the oven.
Steam; - Steam function can be selected at any time during the Manual Mode by pressing the ‘Steam’ button. Steam will be
injected for the pre-set time and the ‘Steam’ LED will illuminate.
If the ‘Timer’ is set to the ‘Infinity’
setting , the timer will count
elapsed time to a maximum of 999
minutes.
Power ‘On’
Indicator