Motorola C300 User Manual
Page 107
107
Me
nu
Fe
at
ure Des
cr
ipti
on
s
to enter the unlock code again. However, if the unlock
code entered is incorrect, the display will show
Insert
Correct SIM
again, and the phone will function as if the
SIM card were not inserted. Your phone can recognize up
to 3 different SIM cards.
Note: There is a limit of 10 wrong attempts before your
phone gets blocked and becomes unusable.
Set Status
Enables/disables the SIM lock. You need to enter the
unlock code first before you change the SIM lock status.
(The default unlock code is 00000000.)
Change Code
Change the unlock code. You will be prompted to enter the
original unlock code first. Enter the original unlock code
and new unlock code twice and press
+
(
OK
) or
N
. The
length of the code may vary from 1 to 8 digits, depending
on your setting.
Call Barring (5-4-5)
You can set up limitations to restrict outgoing or
incoming calls.
All Outgoing
Bars all outgoing calls. Options are as follows:
Activate
—Enter the password provided by your network
operator and press
+
(
OK
) or
N
to enable this function.
Cancel
—Enter the password provided by your network
operator and press
+
(
OK
)
N
to disable the function.
Status
—Show the status of this function.
C300.book Page 107 Thursday, November 7, 2002 4:06 PM