Motorola Bluetooth Wireless Hands Free - Manual (Page 11)

9
Us
ing Your Car
Kit
Validating Pairing
To verify whether your phone has the Bluetooth headset or Bluetooth Hands Free profile,
attempt to pair your phone with the car kit as if the phone has Bluetooth Hands Free profile.
2 If your phone has a Bluetooth Hands
Free Profile, press and hold the Bluetooth
Button
E.*
or
If your phone has only a Bluetooth
Headset Profile, press and hold both the
Bluetooth Button
E and the Voice
Recognition Button.*
The Bluetooth Button
E and the Voice
Recognition Button begin to flash
(often 3 seconds).
The Bluetooth Button
E and the Mute
Button begin to flash.
You now have two minutes to create a
wireless connection between the car kit
and your phone.
To leave pairing mode before timeout,
press the Bluetooth Button
E until the
buttons stop flashing (often 3 seconds).
* If you don’t know which profile to use, see “Validating Pairing” on page 10.
3 Set phone to scan and connect to this
car kit.
For Motorola phones:
a Press MENU .
b Select SETTINGS .
c Select CONNECTION .
d Select BLUETOOTH LINK .
e Select HANDSFREE .
f Select SCAN ALL .
Note: If your phone is not a Motorola
phone, refer to its manual for instructions
on how to scan/discover the car kit.
Your phone scans all Bluetooth Hands
Free devices around it. When your
phone “finds” the car kit, it displays
Motorola BT Car-kit .
4 Select LINK. Your phone displays Pass Key .
5 Enter Pass Key
or
Press 0000
or
Press OK/Send/Yes key (depends on
your phone)
The Bluetooth Button E remains lit
(indicating that the link between your
phone and the car kit has been
established), while all other buttons
stop flashing.
Step Result