Memorex MT2274 - Manual (Page 10)

10
ADJUSTING PICTURE
Press the MENU button.
Press the SET + or – button until the indicator next to
"PICTURE" begins to flash, then press the ENTER button.
Press the ENTER button repeatedly to select the item you
want to adjust.
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on-screen.
1
2
3
4 Press the SET + or – button to adjust the setting.
The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greatly enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made,
make certain that the word “STEREO” appears on the
screen. This means that "Stereo" broadcasting is available.
You can enjoy stereo sound from the left and right speakers.
• When the "MONO" broadcasting is received, no indication
is displayed.
• If the broadcast signal is not strong enough or clear stereo
sound is not available, press the AUDIO SELECT button
to change to mono sound. The noise should be eliminated.
Press it again to return to the stereo sound.
LISTENING TO SAP (SECOND AUDIO PROGRAM)
When the TV is turned on or a channel selection is made, make
certain that the letters “SAP” appear on the screen. This means
that the "Second Audio Program" broadcasting is available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT button to select the desired sound.
STEREO AND SECOND AUDIO PROGRAM (SAP)
NOTE: If connecting this TV with a VCR and/or Cable box, to
receive stereo sound you must use audio/video cables for all
connections. You must also verify that your VCR and/or Cable
box are stereo units.
MONO+SAP BROADCASTING
SAP SOUND
MAIN SOUND
(MONO)
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(STEREO)
STEREO+SAP BROADCASTING
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(MONO)
SAP SOUND
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
increase brightness
increase contrast
brilliant color
greenish color decrease brightness
decrease contrast
pale color
reddish color
makes picture softer
makes picture clearer
–
CONTRAST COLOR BRIGHTNESS TINT SHARPNESS
SOUND ADJUSTMENTS
You can adjust the setting for bass, treble, balance,
surround and stable sound.
Press the MENU button.
Press the SET + or – button until
the indicator next to “AUDIO”
begins to flash, then press the
ENTER button.
Press the ENTER button repeatedly to select the item
you want to adjust.
1
2
3
4 Use the SET + or – button to adjust the setting.
SURROUND FEATURE
The SURROUND feature expands the audio listening field
wider and deeper to create exceptional sound quality from
the TV’s speakers. The feature uses stereo signals from a
TV broadcast or video input.
STABLE SOUND FEATURE
When a loud sound is broadcast the stable sound feature
assists in balancing the volume to a more comfortable
listening level.
TO RETURN TO INITIAL SETTING
Pressing the RESET button while making sound adjustments,
will return all adjustments to the factory preset levels.
NOTE:
The on-screen display will disappear 6 seconds after finishing
an adjustment. The settings can only be adjusted while they
are displayed on the TV screen.
BASS
TREBLE
BALANCE
SURROUND
STABLE SOUND
+
stronger
stronger
right speaker stronger
ON
weaker
weaker
left speaker stronger
OFF
OFF
ON
–
STABLE SOUND
TREBLE BALANCE BASS
SURROUND
LANGUAGE
CH SETUP
PICTURE
MENU
AUDIO
V-CHIP SET
3R20521A-E 27/4/04, 14:05 10