Muratec DIGITAL LASER F-114 - Manual (Page 43)

Service Manual
Disassembly and Reassembly
3-7
Samsung Electronics
1. Before you remove the CIS, you should remove:
- White Roller Ass'y (see section 3.2)
- Rear Cover (see section 3.3)
2. Unplug the CIS connector from the Main PBA. (CN14)
3. Unlatch the CIS using a flat-blade screwdriver and
release it, as shown below. Disconnect harness from
CIS unit.
3.8 CIS
CIS
CIS
CIS
1
2
1. Open the OPE Unit. 2. Pull up the Exit Roller using a flat-blade screwdriver
and remove it, as shown below.
3.9 Exit Roller
Exit Roller
2
1