Motorola CPEI 775 - Manual (Page 36)

68P09301A65-A 4-7
FEB 2009
Advanced Configuration 4
About Tab
The About Tab displays basic properties of your CPE device such as: Product Name,
Model ID, Hardware Version, Serial Number, and the WiMAX MAC Address.
Wi-Fi Advanced
The Wi-Fi Advanced menu provides the following field settings:
Table 4-6 System Tab
Field or Button Description
Language Used in User Interface Select the desired language for the user
interface. The default language is English.
Enable WiMAX Radio Interface Check this box to enable the WiMAX
Radio Interface.
Enable LED Check this box to enable the LEDs on the
front of your CPE device.
Auto Refresh Interval Enter, in seconds, the interval for status
Auto Refresh. Valid range is 2 seconds -
9999 seconds. The default value is 3
seconds.
Rebootstrap EMS Check this box to reconnect the device
with the EMS.
Only perform this function under the
supervision of a Customer Support
Representative.
Table 4-7 Wi-Fi Advanced Menu
Field or Button Description
Enable SSID broadcast
Check the box to disable the SSID of your wireless LAN net-
work to be broadcast by the device. The wireless client on
the wireless LAN will have to know the SSID of the device in
order to connect to the network if this option is checked.
Transmit Rate Select the basic transfer rates based on the speed of
wireless device on the wireless LAN. It is strongly
recommended to keep this setting to Auto.
Transmit Power Set the transmit power level of the antenna. The value
ranges from 1 - 251 mw, default value is 28mw. A safe
increase of up to 70 would be suitable for most users.
Higher power settings are not recommended for users due
to excess heat generated by the radio chipset, which can
affect the life of the device.