Memorex MX4139 - Manual (Page 16)

15
Press the Tune/Skip/Time Down (-)
1
or Up (+) 2 button to select the
first track that you wish to program.
When the desired track number
appears in the display, press the
PROG./MEMO./Clock Set button
3
again.
1 2
3
4
Press either the Tune/Skip/Time
Down (-) 1 or Up (+) 2 button to
select the next track you wish to
program. When the desired track
number appears in the display,
press the PROG./MEMO./Clock
Set button 3 again.
1 2
3
5
Repeat step 5 until you have
programmed up to 20 track
numbers into the CD Program
Memory. When the memory is
full, “--” will blink in the display.
1 2
3
6
After programming up to 20 tracks in the CD Program Memory, press the
PLAY/PAUSE (®p) button 1 to begin programmed playback. “MEMORY” will
appear in the display and playback will begin on the first track that you
programmed. The player will continue to play all of the tracks that you
programmed in the order in which you programmed them. When the last
programmed track has been played, the player will stop and the display will
again show the total number of tracks on the disc. If you press the
PROG./MEMO./Clock Set button ❷ and then press the PLAY/PAUSE (®p)
button 1 again, playback will start on the first track you programmed and will
continue until all the programmed tracks have been played. To cancel the
Programmed memories, while in the Stop mode, press the PROG./MEMO.
/Clock Set button 2 to enter the program mode, and then press the
STOP/BAND (■) button 3 .
2
1
3
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, press
the P-MODE/MEMO. Up button
twice to enter the Repeat All mode
and then program the tracks you
wish to hear in the order you wish
to hear them, as described above.
1
Press the PLAY/PAUSE (®p)
button to begin programmed
repeat playback. Both the
“MEMORY” and “REPEAT”
indicators will appear in the display.
The player will play the tracks you
selected in the order in which you
programmed them. When the last
track in the program has been
played, the entire program will
begin again.
2
Programmed Repeat operation
will continue indefinitely until you
press the STOP/BAND (■)
button.
3
PROGRAMMED REPEAT
OPERATING INSTRUCTIONS (CONTINUED)
NOTE: To check the programmed tracks, while in the Stop mode, press the PROG./MEMO./Clock Set
button repeatedly to view the programmed tracks.