Maxon Telecom MM-5100 - Manual (Page 40)

MM-5100 Windows Setup Manual 090803 NZ Page 40 of 44 4/09/2003
1 1 . S E T T I N G U P Q N C ( Q U I C K N E T
C O N N E C T ) W I N D O W S 9 8 & 2 0 0 0
Before setting up QNC you should install the modem. This is explained in this manual
under “Modem Setup Under Windows”. Particularly refer to the section “Change MM-5100
Modem Properties”
NOTE: for details on the Accelerator service that can significantly boost your web page and internet
access and which is supplied at no charge for both 1x and QNC, please review the information
on the Telstra web site at:
http://www.telstra.com.au/mobilenet/services/mobilint.htm
This section deals with the different settings required for QNC or 1x Packet Connection:
Start Dialup Networking as shown below.
Open Control Panel folder and double click on the icon “Network and Dial-up Connections”.