Multiquip Jimmy Series Hydraulic Rebar Benders - Manual (Page 24)

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 24
JIMMY SERIES HYDRAULIC REBAR BENDERS — NAMEPLATE AND DECALS
NAMEPLATE AND DECALS
BY MULTIQUIP
SERIAL NO. 59- 9 0 0 2
MODEL
JBXXXX
WARNING
Read, understand and follow any
and all printed materials provided
with and on this device. Do not
overload beyond rated capacity.
N e v e r
w o r k u n d e r a l o a d
supported by a hydraulic cylinder.
Immediately support liftef load
with suitable mechanical means.
Failure to heed these markings
may result in personal injury
a n d /
o r p r o p e r t y d a m a g e .
Engineered in U.S.A. Made in Taiwan
SFA Companies © 2003
1
2