Mellerware 29777 - Manual (Page 7)

seconds).
- The appropriate volume of
coffee for a double espresso
is between 80 and 110 ml
(some 50 seconds). Using
“Coffeemotion Largo” capsules
is recommended.
- Always supervise the appliance
while it is functioning.
- Do not leave the appliance
connected unsupervised.
This will also save energy and
prolong the life of the appliance.
- Check that all the product
packaging has been removed.
- Before using the product for the
first time, it is advisable to run
the cycle using only water.
- Before using the product for the
first time, clean the parts that
come into contact with edible
elements as described in the
Cleaning section.
Filling with water:
- The water tank must be filled
with water before turning the
appliance on.
- Extract the appliance water tank.
- Fill the deposit with cold water.
- Fill the recipient respecting the
MAX and MIN levels (Fig. 1).
- Put the water tank back on its
stand, ensuring that it is correctly
positioned.
Use:
- Connect the appliance to the
mains with the power cable (L).
- Turn the appliance on, using the
on/off switch (B).
- The red pilot light (D) will light
up.
- Wait until the green luminous
pilot light (E) lights up, which
means that the appliance has
reached a sufficient temperature.
- Lift up the lever (A) to open the
capsule compartment and introduce
one capsule only.
- Make sure that the capsule has been
correctly positioned (Fig 2).
- Lower the lever (A) and close the
capsule compartment.
- While the appliance is in use the pilot
light (E) will connect and disconnect
automatically, indicating that the
heating elements are functioning
in order to maintain the desired
temperature.
- Position the coffee cup.
- Press the pour coffee button (C) to
pour out the coffee and press again
to stop pouring.
- Withdraw the cup of coffee.
- The capsule will be automatically
disposed when the capsule
compartment (A) is next opened.
- Empty the drip tray (I).
Once you have finished using the
appliance:
- Turn off the appliance, by using the
on/off button (B).
Transport handles:
- This device has two Handles (J)
on both sides at the bottom so that
it can be easily and comfortably
carried
Cleaning
- Unplug the appliance from the mains
and let it cool before starting any
cleaning.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Empty and wash the water tank, the
drip tray (I) and the used capsule