Melissa 653104 - Manual (Page 18)

18 19
INTRODUCTION
To get the best out of your new appliance, please read this user guide carefully
before using it for the first time. Take particular note of the safety precautions. We
also recommend that you keep the instructions for future reference.
IMPORTANT SAFETY PRECAUTIONS
General
• Incorrect use of this appliance may cause personal injury and damage.
• Use for its intended purpose only, i.e. for the preparation of food. The
manufacturer is not responsible for any injury or damage resulting from incorrect
use or handling (see also Guarantee Terms).
• For domestic use only. Not for outdoor or commercial use.
• For connection to 230 V, 50 Hz only. The appliance must be earthed.
• Always follow the instructions in the "Tips for food preparation" and "Using
utensils when preparing food" sections.
• When using convection or grill functions, only use containers suitable for use in
an ordinary oven.
• Do not switch on when empty. To able to absorb microwaves, there must be
something in the appliance (food) to avoid damage. If you would like to practice
using the various functions, place a cup of water inside the oven.
• Do not use the appliance if the turntable ring and glass tray are not installed.
• Never cook food directly on the glass turntable; always use a suitable container.
• On the right-hand side of the oven compartment there is a mica plate (resembles
cardboard); this must not be removed.
• Do not place the appliance or the cord near hot areas, for example gas rings and
electric hotplates.
• Do not use the appliance in damp environments.
• Do not use if the safety locking system is not functioning, which means that
the appliance could be switched on even if the door is not closed. If the door is
open, you risk being exposed to microwave radiation.
• Never prop the door open.
• Do not use the appliance if there are cleaning agent residues inside it.
• Keep an eye on any children in the vicinity of the appliance when it is in use.
Children must not be allowed to use the appliance unless supervised by an
adult.
• When using grill and convection functions, the appliance may get very hot.
• Never insert anything into the ventilation slots or other openings.
• Do not use the appliance if the cable or plug are damaged, if it is not functioning
properly, or if it has been damaged by a heavy impact or similar.
• If the appliance or plug is damaged, it must be inspected and if necessary,
repaired by an authorised repair engineer, otherwise there is a risk of electric
shock. Never try to repair the appliance yourself. Please contact the store where
you bought the appliance for repairs under guarantee. Unauthorised repairs or
modifications will invalidate the guarantee.
• When the light bulb inside the appliance needs to be replaced, please contact
the store where you bought the appliance.
Fire hazard!
To reduce the risk of fire occurring in the oven compartment, please note the
following points:
• Do not cook food for too long or at too high a temperature, and do not leave
unattended if paper, plastic or other flammable materials have been used with a
view to reducing cooking times.
• Metal clips and lids/film containing metallic threads can cause sparks and must
therefore be removed.
• Never store recipe books or other objects in the appliance.
• Never heat oil or fat in the appliance.
• If materials in the appliance catch fire, leave the door closed. Switch off
immediately, and remove the plug from the wall socket.
KEY TO MAIN COMPONENTS OF THE APPLIANCE
1. Dowels
2. Mica plate
3. Spindle
4. Turning ring
5. Glass turntable
6. Baking tray
7. Display
8. Control panel
a. "POWER" button (microwave power)
b. "CONVECTION" button
c. "GRILL" button
d. “MICRO + CONVECTION” button (microwave +
convection)
e. “MICRO + GRILL” button (microwave + grill)
f. “TIME/MENU” button (time/menu)
g. “CLOCK/WEIGHT ADJ.” button (clock/weight
setting)
h. "STOP/CANCEL" button
i. “TIMER” button
PREPARING THE APPLIANCE
Each individual appliance is checked at the factory,
but for safety’s sake, after unpacking it, you should
check carefully that it has not been damaged during transport.
• Check whether there is any visible damage (e.g. in the form of dents or similar),
if the door closes properly, and if the hinges are in order.
• If the appliance appears to have been damaged, contact the shop where you
bought it, and do not use it until it has been checked by an authorised specialist.
• Before use, check that you have removed all packaging inside and out.
Positioning the appliance
• The appliance must stand on a flat surface capable of bearing its weight (approx
19 kg).
• The appliance is not suitable for built-in fitting. There must be a clearance of at
least 10 cm at the rear, 5 cm at the sides and 20 cm above to ensure sufficient
ventilation.
• Check that the vent holes in the cabinet are not covered. If they are covered
while the appliance is in use, there is a risk of overheating. Do not use before it
has cooled down.
• Do not remove the rubber feet.
Connection
• The appliance must be connected to a 230-volt AC current, 50 Hz.
o The guarantee is not valid if it is connected to the wrong voltage.
• When power is connected, a beep is heard and the display (7) will show "1:01".
The clock symbol “CLOCK” is lit.
Setting the clock
1. Press the “CLOCK/WEIGHT ADJ.” button (g) for 3 seconds.
o The display will show “12 H”, and you can change between 12 hour display
and 24 hour display by pressing the button.
2. Turn the "TIME/MENU" button (f) to set hours and press "CLOCK/WEIGHT
ADJ.".
3. Turn the "TIME/MENU" button to set minutes and press the "CLOCK/WEIGHT
ADJ." button.
4. The two dots between the figures will start to flash, which means the clock is
functioning.
Inserting the glass turntable
Before use, ensure the glass turntable (5) is correctly seated on its spindle (3) and
turning ring (4). The three dowels on the glass turntable should fit in between the
three dowels on the spindle. The three rollers on the turning ring should run in the
circular track on the underside of the glass turntable.
Before using for the first time
A small amount of smoke and smell may be emitted when the appliance is used for
the first time. This is due to oil residue from manufacture and is neither abnormal
nor dangerous. Smells can be eliminated by starting the grill program and letting it
run for a few minutes. Smells and smoke should disappear as a result. Repeat the
procedure if this is not the case.
UK