MaxTech XT4888 User Manual
Page 4
Advertising
3
are re-enabled the monitor returns to normal operation.
Section 2 - Installation
2.1
Attaching the Base
• Carefully place the monitor on its
side or top.
• Insert the hooks on the swivel base
into the slots in the bottom of the
monitor. Push down and forward
on the base until it snaps into place.
• Place the display upright in an ap-
propriate location.
2.2
Connecting the Cable
• Make sure that power to the monitor and the computer is off.
• Connect the cable from the back of the monitor to the video connector
on the computer.
• Attach the power cord to the monitor and plug it into an AC outlet.
• The monitor is now ready for use.
Expansion boards
COM1
COM2
LPT1
VIDEO
Figure 2-1 Connecting the
Base
Figure 2-1 Monitor Connections
Advertising