Motorola MOTONAV T815 - Manual (Page 20)

20
8 – Installation and Start Up
Before you can use MOTONAV, you must install the program on your Smartphone. This section provides
step-by-step instructions on how to set up and use your MOTONAV personal navigation system.
Charge the Battery on the GPS Receiver
Before starting, charge the batteries completely in both the GPS receiver and your phone. See section 7 –
GPS Receiver Operating Basics.
Installing MOTONAV from the Storage Card
You can easily install MOTONAV from the storage card included in your MOTONAV package by following
the steps provided below:
1. With your phone on, insert the SD card into the SD slot on your Smartphone. Installation will
start automatically.
Note: You may need to turn the device on and off, depending on the device type.
2. When prompted to choose an installation location, select Device and press Install. MOTONAV
will begin installing.
3. A message should appear saying, “MOTONAV.CAB was successfully installed on your device.”
Press Done.
4. The home screen will open with the MOTONAV shortcut.
Note: If you are using a Motorola Q, and you don’t see the MOTONAV shortcut, press Start >
Settings > Home screen > Home screen Layout, and select Windows Default. Press Done.
5. Start MOTONAV by selecting the home screen shortcut or press Start > MOTONAV. Avoid
running several other applications while running MOTONAV.
Note: The memory card must be kept in your mobile phone in order to enable map usage.
Note: The MOTONAV software can only be installed once. If the initial installation was not successful,
please call Motorola Customer Care at the appropriate number listed in section 16 – Motorola Customer
Care.
Connecting Via Bluetooth
MOTONAV will automatically connect to your GPS receiver via Bluetooth. Please follow the instructions
below to ensure your successful connection. Do not attempt to pair and connect using the Windows
utilities or Bluetooth Manager.
1. Turn your phone’s Bluetooth feature on. Your phone’s Bluetooth feature is “off” by default.
Note: If you are using a Motorola Q, scroll to Start > Bluetooth > Bluetooth Manager >
Settings > Status. Select Bluetooth on and press Done. If you are using another phone,
please refer to your user manual.
2. Place the GPS receiver in close proximity to your mobile phone. Turn the GPS receiver on. The
blue Bluetooth status light will flash on the GPS receiver.
Note: If the light is solid blue before you turn on your phone, the GPS Receiver has already
connected to another device nearby. When the other nearby device is turned off, the Bluetooth
status light should start flashing again. Turn the GPS receiver off and on again.
3. Turn on your phone. Start the MOTONAV application. Wait for the Bluetooth Status light to turn
solid blue, indicating that the GPS Receiver has connected to your phone.