Muratec M F X - 5 5 5 5 - Manual (Page 108)

Supplies and accessories_ 107
supplies and accessories
This chapter provides information on cartridges and accessories available for your machine.
This chapter includes:
• Supplies
• Accessories
SUPPLIES
When the toner cartridge or imaging unit runs out, you can order the
following type of toner or imaging unit for your machine:
ACCESSORIES
You can purchase and install accessories to enhance your machine’s
performance and capacity.
The optional parts or features may differ by countries. Contact your
sales representatives whether the part you want is available in your
country.
TYPE AVERAGE YIELD A
a. Declared yield value in accordance with ISO/IEC 19752.
PART NUMBER
Toner cartridge a Approx. 25,000 TS4555
Imaging unit b
b. Declared yield value is based on a single side of A4- or letter-sized
paper.
Approx. 80,000 DK4555
Depending on the options and job mode, the imaging unit’s lifespan
may differ.
When purchasing new print cartridges or other supplies, these must
be purchased in the same country where the machine was
purchased. Otherwise, print cartridges or other supplies will be
incompatible with your machine, as configurations of print cartridges
and other supplies vary, depending on the specific country.
ACCESSORY DESCRIPTION PART NUMBER
Memory module Extends your
machine’s memory
capacity. 4555256MEM
This machine
comes with
256 MB DIMM.
To expand the
memory of your
machine, you
must remove the
existing DIMM
and purchase a
larger one.
Optional tray 2/3/4 If you are experiencing
paper supply problems
frequently, you can
attach an additional 520
sheet tray. You can
print documents in
various sizes and types
of print materials. C 4000CAS
High capacity
feeder If you are frequently
experiencing paper
supply problems, you
can attach an additional
2,100 sheet tray. C4000CASL
Fax option kit This kit lets you use
your machine as a fax
machine. C4000FAX
After installing
the kit, you have
to set up your
machine to
activate this
machine. (See
Page 111)
Stand You can place the
machine on the
ergonomically-
designed cabinet which
lets you reach the
machine conveniently.
Also, you can easily
move the cabinet with
its wheels, if necessary,
and store
miscellaneous items
like papers into the
cabinet. • Tall Stand: 4 550CAB
• Short Stand:
4550CASTER
If you do not use
the optional tray
then Tall Stand is
recommended. In
case you add
three optional
trays, use Short
Stand.
Stacker & Stapler
(Finisher) 500 sheets 4550FN
Staple Cartridge 3 x 5,000 staples per
package, covers
maximum thickness of
50 sheets, 1 staple
position. 4550STP
ACCESSORY DESCRIPTION PART NUMBER