Marantz PD5001 User Manual

Page 10

Advertising
background image

9

ON/STANDBY

Approx.

7 m / 23 ft

Using the remote control

Battery Installation and Replacement
Designated batteries:
Please use size AAA (R03) or AAA (LR03).
Insert the 2 “AAA” batteries, making sure to set them in
with the proper polarity.
1. Press and open the cover.

CAUTION
• Use only the specified batteries.
• Make sure to insert the batteries correctly according

to the indications of

and

.

• Do not drop or mishandle the remote control.
• Do not get the remote control wet. If the remote

control gets wet, wipe it dry immediately.

• Avoid heat and humidity.
• When not using the remote control for a long period,

remove the batteries.

• Do not use new and old batteries together, or use

different types together.

• Do not take apart the batteries, heat them, or throw

them into a fire.

Operating Range
* Use the remote control within a distance of about 7 m/ 23

ft. from the front of the monitor’s remote control sensor
and at horizontal and vertical angles of up to approximately
30

°.

* The remote control operation may not function if the

monitor’s remote control sensor is exposed to direct
sunlight or strong artificial light, or if there is an obstacle
between the sensor and the remote control.

Cable Management

Using the cable clampers and beads bands provided with
the plasma display; Bundle the signal and audio cables at
the back of the unit to connect to the display.

PD5001

2. Align the batteries according to the

and

indication inside the case.

3.Replace the cover.

Back of the unit

mounting holes

To attach
Insert q into a mounting hole, then
snap w into the back of q to fix the
clamper.
Clampers are designed to be difficult
to undo once in place. Please attach
carefully. Cables can be routed to the
right or left.

Bunch separated cables together and
secure them with the provided beads
bands.
Do not allow excessive stress to be
placed on the ends of cables.

To detach
Using pliers, twist the clamper 90

° and

pull it outward. In some cases the clamper
may have deteriorated over time and may
get damaged when removed.

06.9.7, 4:23 PM

Page 9

Advertising