MSI MS-6380 - Manual (Page 64)

Chapter 3
3-20
and Keyboard 98.
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password in
the field for PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to Hot KEY, then you can assign a hot key
combination in the field for the PS/2 keyboard to power on the system. Settings:
Ctrl-F1 through Ctrl-F12.
Onboard FDC Controller
Use the item to enable or disable the onboard Floppy controller. Select En-
abled when you have a floppy disk drive installed and want to use it.
Onboard Serial Port 1/2
The items specify the base I/O port address and IRQ for the onboard Serial Port
1 (COM A)/Serial Port 2 (COM B). Selecting Auto allows BIOS to automatically
determine the correct base I/O port address. Settings: Disabled, 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 and Auto.
UART Mode Select
The field allows you to specify the operation mode for serial port “COM B”.
Settings are:
IrDA IrDA-compliant Infrared Port
ASKIR Amplitude Shift Keyed Infrared Port
Normal RS-232C Serial Port
RxD, TxD Active
The item determines the active of RxD, TxD. Settings: “Hi, Hi”, “Hi, Lo”, “Lo,
Hi” and “Lo, Lo”.
IR Transmission Delay
The field enables or disables IR transmission delay function. Settings: En-
abled and Disabled.