Control buttons and status screen, Backlight, Sending a test message – Motorola CP1250 User Manual

Page 2: The function menu

Advertising
background image

3

Align the grooves on the battery door with the grooves on the pager housing
and slide the battery door closed.
Slide the battery door lock toward the bottom of the pager to lock the
battery door.

Control Buttons and Status Screen

u

On/Read

Used to turn the pager on and to read a message.

t

Function/Select

Used to display the Function menu and to select
pager settings.

v

w

x

s

Directional

Used to move around the display and through
menus.

Button

On/Read

Function/Select
Button

Directional

H Y L›):)) m )%/)!

DDDD

Buttons

Pager

Status

Folders

R q h a o b

ESCAPE

eijmk

ezBqqhaob

IbIIIIIILI55555555

G

E

TTING

STAR

TED

4

Turning Your Pager On

Press

u

to turn your pager on. A start-up message is momentarily

displayed and your pager activates the currently selected alert.

Press any button to stop the start-up alert.While the pager is on and no
activity is taking place, the Status screen is displayed.

H Y

L

):))

m )%/)!

(Blank screen)

Status Screen example

Alert

Mode

(Audible)

Power

On

Battery status

(Full)

Time

Day and Date

GETTING

STAR

TED

5

Turning Your Pager Off

From any screen, press and release

t

until

ESCAPE

is displayed. (

z

is

flashing.)

Press

v

to move to

e (

TURN OFF

).

Press

t

to turn the pager off. The

TURN OFF?

prompt is displayed.

Press

t

again. The pager is now off and the screen is blank.

Backlight

Your pager’s display can be illuminated in low light conditions. You can
manually turn the backlight on and off by pressing and holding

t

for at least

two seconds.

Sending a Test Message

After you have read this guide and your pager has been activated by your
service provider, send yourself a test message. If you have any problems
sending or receiving your test message, contact your service provider.

GETTING

STAR

TED

6

The Function Menu

The Function menu provides access to many of the pager’s features through a
series of icons and prompts. Press

t

to access the Function menu. An

example is shown below.

Note: Some icons may or may not be displayed on your pager, depending on
your pager’s features and whether or not it has messages.

Getting Around the Function Menu

Press either

v

or

s

to move within the Function menu.

Note: To exit from any menu without accepting changes, press

u

.

Folders

Function prompt

Functions

R q h a o b

ESCAPE

eijmk

ezBqhaobK

Function Menu example

GETTING

ST

AR

TED

Advertising