Macrom M1A.2250 - Manual (Page 4)

Features
RMS Power at 4 ohm Stereo load at 14,4 volts 125 x 2 watts
RMS Power at 2 ohm Stereo load at 14,4 volts 250 x 2 watts
RMS Power at 4 ohm Bridged load at 14,4 volts 500 x 1 watts
THD (total Harmonic Distortion) < 0,1%
Frequency response (+0/-1 dB) 10 - 30,000Hz
Signal to noise ratio > 100 dB
Low Input sensitivity 200-8,000mV
High Input sensitivity 1-10V
Input impedance 22k /100 ohm
Crossover type Variable 18/12 dB/octave
Crossover frequency & fi lter slop (High-pass) 30 to 600Hz (x1) 300 to 6,000Hz (x10)
Crossover frequency & fi lter slop (Low-pass) 30 to 600Hz (x1) 300 to 6,000Hz (x10)
Line Output 1-1
Dimension (w * h * d) mm 250 x 55 x 360
06
• Two channel power amplifi er
• 250 watts into 2 ohms load
• 125 watts into 4 ohms load
• High effi ciency TO3PL transistor on amplifi er stage
• Variable 18/12dB/oct Low-High-Band pass x-over
• Multiplayer x10 Frequency cutting
• Adjustable x-over from 30Hz to 600Hz (x1) 300Hz to 6000Hz (x10)
• Stereo/Mono mode selector (ST/mono Out)
• EBC external bass control
• Pre-amplifi ed Line output
• PWM Mos-Fet power supply
• 20sq.mm power terminals
Technical data
D
UE TO CONTINUING IMPROVMENT
,
THE FEATURES AND DESIGN ARE SUJECT TO CHANGE WITHOUT NOTICE