MartinLogan CW10 - Manual (Page 12)

12 Frequently Asked Questions
f
requently
a
sked
q
uestIons
How .do .I .clean .my .subwoofer?
Use a dust free cloth or a soft brush to clean your subwoofer.
We recommend a specialty cloth (available through the
Xtatic shop at www.martinlogan.com) that cleans better than
anything else we have tried.
Is .it .safe .to .set .things .on .my .subwoofer?
While your CW10 is designed with a durable, stain-resistant
surface, we advise you not to set anything on your CW10—
especially containers holding liquids.
Is .there .likely .to .be .any .interaction .between .
my .subwoofer .and .the .television .in .my .Audio/ .
Video .system? .
Yes. The CW10 subwoofer doesn’t use a shielded driver.
We recommend 3 feet between the CW10 subwoofer
and video components that are susceptible to magnetic
fields.
Will .my .electric .bill .go .'sky .high' .by .leaving .my .
subwoofer .plugged .in .all .the .time? .
No. The CW10, when the power switch is set to ‘Auto
On’, will draw about 12 watts when idle and only 12
watts in standby mode.
Should .I .unplug .my .subwoofer .during .a .thun-
derstorm? .
Yes, or before. It's a good idea to disconnect all of your
audio/video components during stormy weather.
Frequently Asked Questions