Meizu X3 - Manual (Page 9)

17
USB Connection
Connecting the Player to a PC
Caution: Before connecting the USB cable to the player, stop playback.
USB Cable
USB port on the PC USB port on the player
Connect the player and your
computer, it automatically finds
the player. It displays as the
Mobile Disc on your PC.
Connect the USB cable(provided) to the USB port of your computer.
CONNECTING TO A PC
When USB cable is connected to PC for down-
loading files onto the player, it appears on LCD
as the left figure and switch to PC connecting
mode. While connecting to PC, tracks cannot be
played. Pulling out the PC connection cable
from the player before your listening to music.
Cautions: During the connecting of USB cable to your PC,
USB port can be used as power supply. For Windows 98SE,
put the included CD-ROM in your disk drive, then follow the
instructions on your computer screen to install the USB drive.
System Requirement
Pentium 133MHz or Higher
32MB Main Memory or Higher
40MB Hard Disk Space or More
CD-ROM Drive
USB Port (2.0)
Windows 98SE/ ME / 2000 / XP
Insert the installation CD into the CD-ROM drive. The following screen appears
after inserting the CD.
When installation is automatically not
started, execute the setup.exe in the
installation CD, and then the Manager
program is automatically setup.
The installation CD contains the
following contents:
- Device Driver for Windows98 or lower
- Meizu Tools
- MP3 Formatting Tools
- DFU Upgrade Tools
- LOGO DIY tools
Installation CD
Install Software
16
* Small end to player, large end to PC
B
a
s
ic
O
p
e
ra
ti
o
n
2
OK