Miele KM 408-1 - Manual (Page 17)

Electrical connection
All electrical work should be per-
formed by a qualified electrician in
accordance with local and national
codes.
Note to the installer:
Please leave these instructions with
the consumer.
Power supply:
Please check the data plate for
240 VAC, 60 Hz, 15A, or
208 VAC, 60Hz, 15A and make sure
your electrical supply matches the data
plate.
Caution:
Disconnect the appliance from the
main power supply before servic-
ing. To reduce the risk of electric
shock, make sure that the ap-
pliance is properly grounded after
installation.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
The appliance is provided with 3 leads;
L1 (black), L2 (red) and GND (green).
They must be connected to a dedi-
cated line through the use of an ap-
proved junction box.
For further information, see the wiring
diagram provided with the appliance.
Electrical connection
17