Motorola SBV5220 - Manual (Page 28)

Introduction Installation Troubleshooting Glossary License
SBV5220 VoIP Cable Modem User Guide 19
7 On the Insert Disk window, click OK. The Files Needed window is displayed:
8 If necessary, select your CD-ROM drive in the “Copy files from” list.
9 Click Browse.
10 Double-click the NetMotCM.sys file in the CD-ROM root directory. The Files Needed window is displayed:
11 Click OK. The Found New Hardware Wizard window is displayed:
12 Click Finish to complete the installation.
When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 2000” on
page 25.
If you have any difficulties setting up the USB driver, perform “Removing the USB Driver from Windows 2000” on
page 43 and repeat this procedure.