MartinLogan Home Theater System - Manual (Page 8)

8 Removing the End Caps for Painting
Required tools (not included):
Philips head scrwedriver
1 Prepare a flat surface with a cushion and/or blanket to
protect the Ticket. Place the Ticket driver side up.
2 Using a Phillips head screwdriver remove two screws
from the bottom edge of the Ticket (see figure 11).
3 The end cap may now be safely removed (see figure 12).
NOTE: It is important that the end caps are lifted
straight up and away from the speaker body.
Repeat steps 2–3 to remove other end cap.
Figure 11. Removing the end caps step 2.
R
EMOVING THE
E
ND
C
APS FOR
P
AINTING
Figure 12. Removing the end caps step 3.