MSI GME965 - Manual (Page 23)

2-5
Hardware Setup
7. The heatsink paste helps to enhance heat dissipation of the CPU. Before installing
the cooler set (fan & heatsink bundled), make sure that you detach the shield of
the heatsink paste under the cooler set.
8. Locate the four screw holes around the CPU socket where the CPU cooler
backplate was installed. Align the cooler set with the screw holes and mount it on
top of the CPU.
10. Connect the fan power cable to the
CPUFAN1 connector on the mainboard.
9. Screw to secure the cooler set to
the mainboard.
5. Flip over the mainboard and locate the position of the CPU socket.
6. Install the backplate to the back of the CPU socket with holes aligned.
CPU cooler backplate