Metra Electronics MAZDA 6 2009 99-7511S - Manual (Page 4)

99-7511S KIT ASSEMBLY
2
REAR OF RADIO HOUSING
FILLER TRIM PANEL
A
B
C
D
DIN RADIO PROVISION
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure B) 2
Attach the filler trim panel to the back
of the radio housing at the bottom
edge. (Figure A) 1
Slide the aftermarket radio into the DIN
cage until it snaps into place. (Figure C) 3
Snap the pocket into the the bottom
opening of the radio housing.
(Figure D) 4
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.