Mellerware 35600 - Manual (Page 3)

10. Avoid installation behind a door.
11. Do not use any accessories not
recommended by the manufacturer, as this
could damage the heater and therefore void
the guarantee.
12. As with all electrical appliances, this heater
should never be used under conditions
where it may be immersed, or come into
contact with water. Do not install the heater
in the immediate vicinity of bath tubs,
showers, wash basins, swimming pools, etc.
13. Do not operate if this unit is damaged. Return
the heater to the manufacturer or approved
service agent for repairs. Do not repair
yourself as this will void the guarantee.
14. Unplug before cleaning.
15. If the power supply cord is damaged, it must
be replaced by the manufacturer or approved
service agent.
16. When not in use, store your heater in a cool
dry place.
17. The heater is intended for normal domestic
use only.
18. This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its.
19. Do not allow the power cord to hang or to
come into contact with the hot surfaces of the
appliance
SPECIFICATIONS
Voltage: 220-240V
Frequency: 50Hz
Total input power: 900W
FUNCTION/HEAT SELECTOR
0 OFF
I 300W
II 600W
III 900W
To select the desired heat setting, slide the
function/heat selector to the level that you
are most comfortable with, according to the
functions above.
CLEANING AND CARE
1. Before cleaning the heater, ensure it is
disconnected from the wall socket, and has
cooled down completely.
2. To avoid the risk of electric shock, do not clean
the heater with water and do not immerse it in
liquid.
3. The housing may be wiped with a slightly damp,
lint free cloth.
4. If necessary, dust particles accumulated in the
air outlet openings may be removed with a
vacuum cleaner.