Maxtor DIAMONDMAXTM 2160 - Manual (Page 11)

PRODUCT DESCRIPTION
2 – 1
SECTION 2
Product Description
Maxtor DiamondMax™ 2160 AT disk drives are 1-inch high, 3.5-inch diameter random access storage devices
which incorporate an on-board Ultra DMA/ATA controller. High capacity is achieved by a balanced
combination of high areal recording density and the latest data encoding and servo techniques.
Maxtor's latest advancements in electronic packaging and integration methods have lowered the drive's power
consumption and increased its reliability. Advanced magneto-resistive read/write heads, an state-of-the-art head/
disk assembly using an integrated motor/spindle design allow up to four disks in a 3.5-inch package.
Exceptionally high data transfer rates and < 9.7 ms access times make these performance series disk drives
especially well-suited to high speed desktop and server applications.
DiamondMax 2160 Key Features
ANSI ATA-4 compliant PIO Mode 4 interface (Enhanced IDE)
Supports Ultra DMA Mode 2 for 33 MB/sec data transfers
256 KB buffer with multi-adaptive cache manager
< 9.7 ms seek time
Zone density and I.D.-less recording
High reliability with
>
500,000 hour MTBF
Outstanding shock resistance at 150 Gs
High durability with 50K constant start/stop cycles
Advanced multi-burst on-the-fly Error Correction Code (ECC)
Extended data integrity with ECC protected data and fault tolerant servo synchronization fields
Supports EPA Energy Star Standards (Green PC Friendly) with ATA powering savings commands
Auto park and lock actuator mechanism
Low power consumption
S.M.A.R.T. Capability
Note: Maxtor defines one megabyte as 10 6 or one million bytes and one gigabyte as 10 9 or one billion bytes.