Magic Chef MCO160S - Manual (Page 17)

16
Basic Instructions
1. Touch the VENT FAN Pad once for
HIGH speed.
The Display will be “ Hi”.
2. Touch the VENT FAN Pad twice for
LOW speed.
The Display will be “Lo”.
3. Touch the VENT FAN Pad three times
for turning vent fan off.
The Display will be “OFF”.
Using the Vent Fan
To Set Fan to Run for a Specific Time:
1. Start fan by touching the VENT FAN Pad.
2. Program run time.
◆ Touch the TIMER Pad and hold for
3 seconds.
3. Enter desired time.
4. Touch the START Pad.
To Cancel Timer:
◆ Touch CANCEL/OFF Pad.
You can control the 2-speed fan by touching the
VENT FAN Pad.
Basic Instructions
1. Touch the LIGHT Pad once for turning
the cooktop light on.
The Display will be “On”.
2. Touch the LIGHT Pad twice for turning
the light off. The Display will be “OFF “.
◆ If there is no user input for 10 hours,
cooktop light and vent fan will turn off
automatically to save energy.
Using the Cooktop Light
You can control the light by touching the LIGHT
Pad.
Note . . .
◆ Canceling the timer will cause the timer to
shut off; however, canceling the timer will
not cancel the fan. The fan will continue to
operate until turned off.
The oven operation can be locked to prevent the
microwave from accidentally being turned on.
All oven functions can be locked.
To Set:
Touch and hold the CANCEL/OFF Pad for
three seconds. The Display shows “Loc” and the
oven beeps.
To Cancel:
Touch and hold the CANCEL/OFF Pad for
three seconds. “Loc” disappears from the
Display and the oven beeps.
Control Lockout