Mio A501 - Manual (Page 148)

8-2
Mio Programs
3. Tap the desired contact from the contact
list.
You can also tap Enter a number , enter a
phone number manually, and then tap the
OK soft key.
4. To delete a recipient, select the item to
delete from the list and tap Delete .
5. Tap ok to save the setting.
Sending an Emergency Message
1. Make sure that you have defined the
recipient for the emergency message.
2. Make sure that the device has a clear view
of the sky for optimal GPS signal
reception.
3. Press and hold the Volume down button on
the side of the device for 6 seconds to
activate the program. (If you have not
defined the recipient, the program will
display a notification message.)
4. The program will activate the GPS port of the device and search for the
GPS data, and then send the message. (You may use the Quick Position
program for a quicker GPS position acquisition. See section 8.2 for
information.)
If you have defined multiple recipients, then all recipients will receive
this message.
5. The program will automatically send notifications to let you know the
message has been sent out.
If the device has received the GPS data (in about 2 minutes), the message
will contain the longitude and latitude information. If the device fails to
receive the GPS data, then the message will only show that you need help.