Marantz RC3200 - Manual (Page 11)

User Guide
9
You operate devices using the buttons on your RC3200:
• Soft buttons (touch screen buttons);
• Hard buttons.
Using the Soft Buttons
By tapping the soft buttons on the LCD touch screen you send IR
commands to the device you have selected. The name of the active
device is indicated at the top of the touch screen.
Note You can operate the soft buttons in the same way you operate
hard buttons on a conventional remote control. When you keep
the soft button pressed instead of tapping it, RC3200 keeps
sending the IR command.
Using the Hard Buttons
Hard Buttons can be operated at any time, even without turning on
the LCD touch screen.
Mode button:
Press and hold 3 sec-
onds to activate the
Mode screen (enables
you to program the
RC3200). Back and Fwd buttons:
Tap to navigate back and
forth between the last few
panels you’ve viewed (like an
internet browser).
Home button:
Tap to activate the
Home screen.
Function button:
Can be programmed
at will.
Status button:
Reserved for status of
special Marantz prod-
ucts.
Volume Up and
Volume Down
Channel Up and
Channel Down
Mute
Menu buttons:
To perform actions in
the menu of a device,
like the on screen dis-
play of a TV or a VCR
display. Use the cursor
to move up, down, left
or right in the menu and
press OK to select.
Using Your RC3200
Function button:
Can be programmed at
will.