Motorola CLS1410 - Manual (Page 31)

Pr
ogramming Mode
29
Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code
combinations that filter out static, noise, and unwanted messages.
1. In programming mode, press S until y displays and the code
number flashes.
2. Press
[
or
]
to select the code (see page 42).
3. Press and hold Push to Talk to exit programming mode, or press
S to continue programming.
Programming the Available Channels (CLS1410 only)
If you need fewer channels, you can reduce the number of available channels.
1. In programming mode, press S until = displays and the channel
number flashes.
2. Press
[
or
]
to select the number of channels you want
available.
3. Press and hold
Push to Talk
to exit programming mode, or press
S to continue programming.
Note: The radio retains settings for channels made unavailable.
6864110w15o.book Page 29 Wednesday, March 19, 2003 6:17 PM