MACKIE C300i - Manual (Page 4)

4
Mixer or
Preamplifier
Right
Line level
Output Left
Line level
Output
1202-VLZ PRO
Stereo
Power Amplifier
C300i C300i
SERIAL NUMBER MANUFACTURING DATE
SOUND REINFORCEMENT SPEAKER SYSTEM
PROLONGED EXPOSURE TO HIGH
SOUND PRESSURE LEVELS MAY
LEAD TO PERMANENT HEARING
DAMAGE. PLEASE USE CARE WHEN
SETTING MAXIMUM LOUDNESS.
CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC, WOODINVILLE, WA, USA AND MACKIE EUROPE • MANUFACTURED IN ITALY • COPYRIGHT ©1998 • THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
C300
INPUT THRU PARALLEL
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL
WIDE DISPERSION EVERYBODY HEARS THE SAME THING
RMS • 300 WATTS
MUSIC • 500 WATTS
PEAK • 750 WATTS
SPECIFICATIONS: POWER HANDLING:
IMPEDANCE • 8 OHMS HORN DISPERSION • 90 ° X 40 °
DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF SUSPENSION HARDWARE.
POWERED MIXER
SERIAL NUMBER MANUFACTURING DATE
SOUND REINFORCEMENT SPEAKER SYSTEM
PROLONGED EXPOSURE TO HIGH
SOUND PRESSURE LEVELS MAY
LEAD TO PERMANENT HEARING
DAMAGE. PLEASE USE CARE WHEN
SETTING MAXIMUM LOUDNESS.
CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC, WOODINVILLE, WA, USA AND MACKIE EUROPE • MANUFACTURED IN ITALY • COPYRIGHT ©1998 • THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
C300
INPUT THRU PARALLEL
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL
WIDE DISPERSION EVERYBODY HEARS THE SAME THING
RMS • 300 WATTS
MUSIC • 500 WATTS
PEAK • 750 WATTS
SPECIFICATIONS: POWER HANDLING:
IMPEDANCE • 8 OHMS HORN DISPERSION • 90 ° X 40 °
DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF SUSPENSION HARDWARE.
POWERED MIXER
HOOKUP DIAGRAMS
2. Connect the “Speaker Output” from
your power amplifier (or powered mixer)
to the
INPUT connector on the C300.
3. Turn on your mixing console (or other
signal source).
4. Turn on the amplifier. Turn up its
volume or gain control(s) as recom-
mended by the manufacturer.
5. Start the signal source, whether it be
speaking into a microphone or starting a
CD player. Adjust the volume controls
on the mixer (or other signal source) for
normal operation.
Quick Start
Make all initial con-
nections with the power
switches OFF on all
equipment. Make sure all
master volume, level, or
gain controls are all the way down.
1. Connect the line-level outputs from
your mixing console (or other signal
source) to the inputs of your power
amplifier.
C300 i : WITH A MIXER AND POWER AMPLIFIER
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS
2 PER POWERED MIXER OR AMPLIFIED CHANNEL
POWERED MIXER
C300 i : WITH A POWERED MIXER, AND USING THE THRU JACK