McIntosh MSS630 - Manual (Page 7)

7
Installation
When selecting a Crossover mounting location, make sure
there is adequate room for ventilation (there are openings
on both sides of the Cross-
over) and for making con-
nections to it. Use the sup-
plied screws for mounting
the Crossover to the vehicle.
1. Using the Crossover as
a template, mark the
two locations to drill
holes in the mounting
surface for the Cross-
over mounting screws.
Drill two holes with an
appropriate size drill bit.
Refer to figure 3.
2. Secure the Crossover to
the mounting surface
with the two #6 x 7/8
inch supplied Sheet
Metal Screws. Refer to
figure 4.
3. Follow instructions for
connecting the Crossover
to the Loudspeakers on
pages 8 and 9.
Mounting the Crossover
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
Figure 4
Mounting
Surface
Side View
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
Mounting
Screws
Figure 3
Mounting Screw Locations