Configuring the gateway, Starting the gateway configuration manager – Motorola SURFboard SVG2501U User Manual
Page 25
B
Configuring the Gateway • Starting the Gateway Configuration Manager
SVG2501 Series Wireless Voice Gateway • User Guide
16
550885-001-a
5
Configuring the Gateway
Use the SVG2501 Configuration Manager to change various default configuration
settings on your gateway.
Note: If your gateway was obtained as part of a service package, your service provider
may require alternative configuration methods. If you cannot access any of the HTML
pages in the Configuration Manager, please contact your service provider for more
information.
Read the following very important issues before proceeding:
•
To prevent unauthorized access, change the default username and password
immediately after logging onto the SVG2501 Configuration Manager for the first
time. See
Changing the Default Username and Password
for more information.
•
For security purposes, do not configure your SVG2501 Wireless Voice Gateway over
a wireless network connection.
Starting the Gateway Configuration Manager
1. Open any web browser on a computer connected to the gateway.
2. In the Address bar, type
http://192.168.0.1
for the Configuration Manager’s IP
address, and then press Enter. The gateway login screen appears.
3. Type the default username and password. Both entries are case-sensitive.
Username:
admin
Password:
motorola
4. Click Login to open the SVG2501 Configuration Manager (CMGR).