Morphy Richards FP48950MEE - Manual (Page 4)

QUICK GUIDE
Attachments & tools
Name
Function Type of food Max vol. Time Special notes
CHOPPING BLADE Chopping Meat, vegetables,
cheese, chocolate
700g 15-20 secs Pulse gives control
over texture
Blending Soup, drinks 700g 20 secs
Pureeing Cooked vegetables,
potatoes, and fruit
600g 10-15 secs
DOUGH BLADES Mixing Pastry, scones 350g 1 min max Max vol=weight of
flour
Cakes (total weight) 1kg 1 min max
Kneading Bread dough 600g flour 20 secs Max vol= weight of
flour
400g water + 2 min rest Do not over process
SLICING & Slicing/Shredding Vegetables, cheese,
SHREDDING potatoes, fruit, chocolate
THICK SLICING & COARSE Vegetable, cheese
SHREDDING potatoes, fruit, chocolate
CHIPPING BLADE (certain models only)
Chipping Potatoes, vegetable Chips produced are
(certain models only) batons usually small french
fries type
WHISK Whisking Egg whites 6 eggs 1-2 mins
(min 2-max 6 eggs)
Cream 570ml 40-50 secs Do not over process
MINI PROCESSOR BOWL
MINI CHOPPING Chopping Herbs and small 20g herbs 2-5 secs
BLADE quantities
DO NOT PROCESS FOR LONGER THAN RECOMMENDED TIME. DO NO EXCEED RECOMMENDED
MAXIMUM VOLUMES. ALWAYS HOLD THE BLADES BY THE CENTRE GRIP.
Assembly
Setting up
1 Ensure the appliance is unplugged
from the mains.
2 To fit the bowl, align the handle as
shown. Turn the handle clockwise
until it is clicked into place
A.
(Note, the handle can be located for
left hand
⁄ or right hand ¤ use).
3 Fit the detachable drive shaft over
the induction motor drive.
B
4 Select the appropriate blade and fit
over the detachable drive shaft,
referring to ‘fitting and using the
tools’ for details.
5 Fit the lid to the processor bowl by
aligning the indicator on the lid to the
right hand side of the handle and
then rotate clockwise, until the lid
clicks firmly into place
C.
6 Ensure that both food pushers are in
place before processing. They should
only be removed to insert food
D.
FITTING AND USING THE
TOOLS
In general, all attachments (with the
exception of the mini processor bowl
and small blade) which are fitted
within the processor bowl must be
firmly attached to the detachable
drive shaft. Always adjust the
attachments until you are sure that
they are correctly fitted.
Detachable drive shaft
Insert attachments over the top of the
detachable drive shaft and ensure
that they are securely clicked into
place. Then remove the blade covers
(if applicable), taking care as the
blades are sharp
E.
Chopping blade
1 Fit the processor bowl as detailed
previously.
2 Fit the chopping blade over the motor
drive, and fit firmly into place
F.
Warning: Use extreme caution -
the blades are sharp. Always
handle the chopping blade by its
central plastic section.
3 Place the food into the bowl.
4 Fit the lid and click into place as
detailed in the ‘Setting up’ section.
5 Plug in the processor and switch to
speed 1
G. If the processor does not
come on, check that processor lid is
correctly fitted.
Warning: For safety, always use
the food pusher when putting
food into the feeder tube. Never
feed by hand or utensils.
6 For large foods feed through with
the large food pusher. The small
pusher should be locked into place
when using. When processing small
pieces of food, unlock and use the
small food pusher, leaving the large
pusher in place in the lid
H.
WARNING: Do not use the small
food pusher without the large
food pusher being in place in
the lid feed tube.
7 When the processing is complete,
remove the blade from the bowl
before removing the processed
food.
Dough blade
1 Fit the processor bowl into place as
described in ‘Setting up’.
2 Place the dough blade on the
detachable drive shaft. Then place
the ingredients in the bowl.
3 Fit the lid and slot into place, make
sure that it clicks.
4 Now plug in the processor.
5 Turn the processor on and operate
until the dough has formed into a
small ball.
6 Remove the blade from the bowl
before removing the dough.
IMPORTANT: When kneading dough,
do not operate the machine longer
than 30 seconds.
Afterwards, wait at least 2 minutes
before operating the machine again.
Warning: For safety, always
leave the pusher in place whilst
operating the processor.
Whisk attachment
1 Fit the processor bowl as detailed
previously in ‘Setting up’.
2 Place the whisk attachment onto the
motor drive.
3 Add ingredients into the bowl.
4 Fit the lid, food pusher and click into
place as detailed in ‘Setting up’.
5 Plug in the processor.
6 Turn the processor on.
6 7 www.morphyrichards.com www.morphyrichards.com
g
В
‰
И
Л
Н
fi
‚
Á
A
⁄
¤
C
B
D
E
F
H
G