Motorola SD4550 - Manual (Page 14)

3
Installing Backup Batteries (optional)
Install four AAA alkaline batteries (not included) for use as
power backup in case of outage.
With the front of the base facing you, carefully remove the
right side panel, exposing the battery compartment.
1 Press the cover latch to remove the battery
compartment cover.
2 Insert four AAA alkaline batteries as directed on the
compartment.
3 Replace the cover by inserting the tabs of the cover
into the slots on the base station. Press down until the
cover clicks into place.
Note: The backup batteries discharge somewhat during
each power outage. If your power fails often or for more
than an hour, you should replace the batteries to ensure
they are fresh whenever they are needed.
SD4550English.book Page 3 Thursday, January 27, 2005 4:50 PM