Mobi Technologies 70061 - Manual (Page 8)

CAMERA OPERTATION & INSTALLATION
Power ON/OFF
Use the Power ON/OFF sliding switch to turn ON/OFF the unit (see
#21 on page 3).
Channel Selection
Press the Channel Selection Switch (fig. 17) on the Camera to
choose which channel you want the unit to transmit on. The chan-
nel indicator LED (fig. 16) will illuminate which channel the Camera
is set to (A or B). Make sure to set the additional camera to a differ-
ent channel than the first camera. For instance, if the fist Camera is
set to Channel A, then the additional should be set to Channel B.
Voice Activation
To Activate: Select the VOX setting on the Function Activation
Switch (18)on the left side of the Camera unit. When the sound level
within the area surrounding the unit reaches a preset level, the
Camera will begin transmitting the image and sound to the Monitor.
NOTE: The LCD on the Monitor unit will automatically switch to
standby mode if no signal is received from the Camera. To Deacti-
vate: Select the CAMERA setting on the Function Activation Switch
of your camera.
Automatic Infra-Red Night Vision
The infra-red night vision feature will switch on automatically
during darkness or periods of very low levels of light and a black
and white image will be displayed on the monitor. Once the feature
is activated objects must be within 6 ft/ 2 m of the camera to be
seen on the monitor.
7 4