Motorola i365IS Phone - Manual (Page 67)

61 calls
3 Select a code number from 1 to 15 or one
of the following options:
4 When you are finished, press - under
Back to return to the LINCaround idle
screen.
option
Receive All: Sets your phone to receive
LINCaround transmissions from any phone
that is set to the same channel, regardless
of the code (1-15). When you receive
transmissions with the code set to Receive
All, the display changes from Receive All to the
code on which the transmission was
received.
Tip: You can reply to an incoming call within
6 seconds after hearing the short ending
beep by pressing the PTT button.
Note: You cannot initiate a code call when
the code is set to Receive All. If you push the
PTT button with the code set to Receive All,
you will receive an error message.
Pvt Only: Allows you to have a private
conversation with another person using
LINCaround. When on a private
LINCaround call, no other parties can hear
your conversation. In order to make a
private LINCaround Call, you must use the
valid 10-digit Personal Telephone Number
(PTN) of the person you are calling. The
person you are calling must be in
LINCaround and set to the same channel to
receive your call.
Note: An error message will occur if you
don’t use a valid PTN, or the person that you
are trying to reach is not in LINCaround, or
is set to a different channel or out of range.
option