Use gps with map software – Motorola i365IS Phone User Manual

Page 56

Advertising
background image

50

basics

Transmitters Off turns off your phone’s calling
features in situations where wireless phone
use is prohibited, but you can use the phone’s
other non-calling features when Transmitters
is turned Off.

Find it: M >

u

> Advanced > Transmitters > Off.

use GPS with map
software

Your phone is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.

Note: No serial port connectivity is provided
by your phone. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.

The data sent to the host device is formatted
as prescribed in the National Marine

Electronics Association 0183 V3.0 (NMEA-
0183) standard. As such it supports the
following sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.

This handset is not a full NMEA-0183
compliant device supporting electrical RS-422/
RS-232 connectivity as dictated by the NMEA-
0183 standard. Consequently it's unsuitable
for conventional marine NMEA-0183
equipment use. Its intended use is for normal
"terrestrial" mobile users who want to enable
their USB hosting computing devices such as
a PC, laptop or PDA with the phone's highly-
capable GPS functionality.

get connected

1

Open the phone's bottom
connector and insert a cable into the
phone's bottom connector.

2

Insert the other end of the cable into a
vacant USB receptacle of your host

Advertising
This manual is related to the following products: