Magnadyne MV-DVD-PL8 - Manual (Page 18)

18
Only qualified service personnel should
remove the cover or service this player.
Otherwise the warranty will become
invalid.
If it appears that your DVD unit is faulty,
first consult the list below.
No Power:
• Check to see if the player is set to "On".
• Check the power plug of the main unit
is properly connected.
• Check that power outlet is properly
working.
No Picture:
• Check to see the monitor or TV is
switched to "On".
• Select the correct AV input on the moni-
tor or TV.
• Check the video connection.
Distorted Picture:
• Check the disc for fingerprints and
clean with soft, dry, cloth, wiping from
center to edge.
• A small amount of picture distortion
may appear. This may not be a malfunc-
tion.
No Sound:
• Check audio connections.
• If using a Hi-Fi amplifier, try another
sound source.
Disc Does Not Play:
• Ensure the disc label is facing upwards.
• Clean the disc.
• Check to see if the disc is defective by
trying another disc.
No Return to Start-Up Screen when Disc
is Removed:
• Press POWER to turn "Off" the unit,
then press it again to turn "On" the unit.
• Press RESET button "On" the front of
the DVD unit.
The Player Does Not Respond to the
Remote Control:
• Aim the remote control directly at the
sensor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
• Inspect or replace the remote control
batteries.
No Audio at Digital Output:
• Check the digital connections.
• Check the Digital Audio menu to make
sure that the digital output is correctly
set.
• Check if the audio format of the select-
ed audio language matches your receiv-
er’s capabilities.
Buttons Do Not Work:
• Press POWER to turn "Off" the unit,
then press it again to turn "On" the unit.
• Press RESET button on the front of the
DVD unit.
Troubleshooting
MV-DVD-PL8-UM.qxp 2/20/06 2:22 PM Page 18