Memorex MVBD2520-R - Manual (Page 48)

47
UPDATING THE FIRMWARE
UPDATING THE FIRMWARE
Follow these steps to update the Firmware:
1. To obtain the latest version of the Firmware please visit our website at: www.memorex.com
2. Copy the Firmware to a CD, USB drive or SD card.
3. Insert the disc, USB device or SD card.
4. Use the following instructions to update the firmware: While in the General Setup menu, select System using the
Navigation (π,†) buttons, then press the Navigation (®) button to enter. Select Upgrade using the Navigation (π,†)
buttons, then press the Navigation (®) button to select. Select the desired upgrade device using the Navigation (π,†)
buttons, then press the ENTER button.
5. Remove the disc, USB device or SD card, then turn off the unit and turn it back on again.
IMPORTANT: Do not turn the power off or remove the USB drive while the firmware is being updated.