Metabo ASE 18 - Manual (Page 8)

214 | 214 |
Ta M 3034 Ta E 3030 Ta E 2019
TACKERS
Special advantages
Also suitable for handling flat
wire staples
Reshaping feature
(for staples and nails)
Electronically controlled multiple
impact device (for staples and
nails). A depth probe automati-
cally interrupts the multiple
blow when the staple (the nail)
is fully driven in.
Rubber protective shoe to be
fitted on the tacker tappet.
The protective shoe prevents
the formation of pressure
marks on the soft material
while working with the tacker.
Comparative device characteristics
Maximum pulse string
20 /min 20 /min 20 /min
For working with
- Staples, 4 mm wide 12 - 18 mm 18 - 30 mm 18 - 30 mm
- Staples, 10 mm wide 8 - 18 mm
- Flat wire stapl., 10 mm wide 8 - 14 mm
- Nails 19 mm 16 - 30 mm 16 - 30 mm
Weight (without mains cable) 1 kg 1,2 kg 1,2 kg
Standard equipment Universal magazine for all
commercial staples and nails,
3 front plates
Magazine for 4 mm wide
(up to 30 mm long) staples
and 16-30 mm long nails,
rubber protective shoe
Magazine for 4 mm wide
(up to 30 mm long) staples
and 16-30 mm long nails,
rubber protective shoe
Type Ta E 2019 Ta E 3030 Ta M 3034
Order no. 6.02019 6.03030 6.03034
COMMON FEATURES
For staples, nails, Metabo shaped wood claws (for fixing slot and
spring boards) and groove clutches (for panels)
Electronically variably modifialbe impact force
Tappet with nut for specific placing of tacker on the positioning
lung of the Metabo shaped wood claws and groove clutches
Protection against unintentional triggering of blows
Tacker
Ta E 2019
Tacker
Ta E 3030
Tacker
Ta M 3034