Memorex MLT3221 - Manual (Page 21)

ENGLISH

Chapter 2 Installing the LCD TV

Press the INPUT button on the remote to display the Input Source List. Use the ▲▼ buttons to
select TV and press the OK button.
Input Source

Press the OK button to display the received channel list. Then press ▲▼ to select a
channel and press again the OK button to display the channel detail.
The digital main channel might include many subchannels (for example -, -
2..) that are showing program at the same time.
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.
TV Select Exit
Channel Scan
Tuner Mode
Cable
Channel Skip
Favorite List
Time Zone
Eastern Time

Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.

Press the ▼ button to select Channel Scan, and press the OK button.
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
Status: Scanning..... Cable
Analog Channels: 2
Digital Channels: 0
%
Channel List
5-2 RF5-2
9-1 KQED-HD
9-2 KOED-SD
8 CCT
12
13
15
Channel Detail
Calfornia’s Gold
Or, use the ▪ (Input button) with 0- buttons to select digital channel( for example 9.1)
 TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI 1)
VIDEO7 (HDMI 2)
COMPUTER(VGA)