Metra Electronics 99-9009 - Manual (Page 6)

99-9009
4
FINAL
ASSEMBL
Y
1 Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter and making the
connections as shown. (Isolate and indi-
vidually tape off the ends of any unused
wires to prevent electrical short circuit)
2 Re-connect the negative battery terminal
and test the unit for proper operation.
3 Reassemble radio and dash assemblies in
reverse order of disassembly.
A
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
B
C
D