MITSUBISHI ELECTRIC WD-65736 - Manual (Page 33)

4. TV Operation and Features 33
Media Setup Menu
Media Setup menu
In the Media Setup menu you can adjust the slide show
display, number of repetitions, or display interval.
t
4FMFDU
FJUIFS
Auto or Manual advance. During
manual operation, press or ENTER to advance to
the next slide.
t
'PS
BVUPNBUJD
BEWBODF

TFMFDU
UIF
UJNF
JOUFSWBM
GPS

display of each slide. The interval you select here is
the minimum time between slides; actual time may
be longer for larger files.
t
'PS
BVUPNBUJD
BEWBODF

TFMFDU
UIF
OVNCFS
PG
UJNFT

(frequency) to play the complete slide show: Once,
Twice, or Continuous.
t
1SFTT
EXIT to close the Media Setup menu and
return to the USB Photo menu.
USB Photo Menu Compatible Picture Files
t
4UJMM
JNBHFT
SFDPSEFE
PO
EJHJUBM
DBNFSBT
VTJOH
UIF

Exchangeable Image File Format, version 2.1 (EXIF
2.1) standard for digital still cameras and Design
Rules for Camera File Systems version 1.0 (DCF 1.0)
t
4PNF
JNBHFT
PQFOFE
BOE
SFTBWFE
PO
B
DPNQVUFS

may not play back or may not display in the thumb-
nail list. This happens if the files were resaved in an
incompatible format.
t
'VMM
QBUI
GJMF
OBNFT
DBO
CF
OP
MPOHFS
UIBO

DIBS-
acters and must end in a .jpg extension. Only the
first 20 of the 50 characters will display.
t
*NBHFT
PO
TUPSBHF
EFWJDFT
XJUI
B
DBQBDJUZ
PG
PWFS

256 MB can take a longer initial time to display.
Photos and Moving Video as Composite
Video
Connect the camera to the TV using a composite video
cable if:
t
:PV
BSF
VOBCMF
UP
TFF
JNBHFT
VTJOH
UIF
64#
QIPUP

port.
t
You wish to view moving video from the camera.
The TV’s USB Photo menu will be unavailable and
you must control the slide show through the camera.
Display resolution is standard-definition (480i).
Refer to the owner’s manual supplied with the 1.
camera for instructions needed for this setup.
Set the camera’s output signal type to 2. NTSC and
put the camera into playback mode.
With the camera still turned on, connect your digital 3.
camera’s composite video cable (usually yellow)
to the VIDEO/Y jack on the front of the TV. To hear
audio, connect the camera’s audio output cable to
the AUDIO L jack.
When the 4. Auto Input Sensing screen displays,
press EXIT or assign the name Camcorder.
Press 5. INPUT to display the Input Selection menu.
Highlight the icon for the camera input and press 6.
ENTER.
If viewing photos, advance through the images manu- 7.
ally or set the camera to advance automatically.
L-AUDIO-R
USB
VIDEO/Y Pb Pr
I
N P
U
T
4 L-AUDIO-R
USB
VIDEO/Y Pb Pr
I
N P
U
T
4 L-AUDIO-R VIDEO/Y
I
N P
U
T
4
0QUJPOBM

"VEJP
$BCMF
Camera connection using a composite video cable
Slide Show
Use these keys during the slide show:
Keys for JPEG Picture Slide Show
Begin or resume slide show playback
Pause or resume playback while in auto-
matic advance mode.
or
ENTER
Advance to the next slide.
Go to the previous slide.
FORMAT Rotate the slide clockwise in 90˚ incre-
ments.
Stop slide show and display the USB Photo
menu.
INFO Display status for the viewing device and
current image.
INPUT Display the Input Selection menu.
MENU Display or remove the TV Main menu.
Note: Always press (STOP) to stop slide show play-
back before disconnecting from the USB Photo
port.
IMPORTANT
The TV can read JPEG files as created by the
camera. If you edit a picture file on a computer
and resave the image, the TV may be unable to
read the resaved file.