Philips Magnavox MC132DMG - Manual (Page 31)

Rerecording (Tape Duplication) 31
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment
may operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Programs that are copyright
protected may not record clearly.
Helpful Hints
VIDEO AUDIO
POWER
VIDEO
IN
OUT
AUDIO
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
AUDIO and VIDEO In
Jacks on TV/VCR
Audio Cable from
AUDIO OUT to AUDIO In
Video Cable from
VIDEO OUT to VIDEO In
1 Make the connections shown above, using
audio and video cables (not supplied). Connect
the source unit (VCR or camcorder) to a
power source after connections are made.
2 The source unit will play your tape. Insert a prere-
corded tape in the source unit. If playback begins,
press the STOP button on the unit.
3 The TV/VCR will record your tape. Insert a blank
tape in the TV/VCR. Make sure the tape’s record
tab is intact. The TV/VCR power will turn on auto-
matically.
4 Point the TV/VCR remote control at the
TV/VCR. Press Number buttons 0, 0 so that
A/V IN appears on the screen.
The TV/VCR is now in Line Input mode.
5 Point the TV/VCR remote control at the
TV/VCR. Press the SPEED button until the
desired tape speed (SP or SLP) appears on the
screen.
6 Press the PLAY button on the source unit and
the REC(ord)/OTR button on your TV/VCR at
the same time. Copying will begin.
7 To stop copying, press the STOP/EJECT but-
ton on the TV/VCR, then stop the tape on the
source unit (VCR or camcorder).
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 31