Motorola Deluxe Ic902 - Manual (Page 92)

74 Section 2B: Controlling Your Phone’s Settings
Adjusting the Phone’s Volume Settings
You can adjust your phone’s volume settings to suit your
needs and your environment.
To adjust your phone’s volume settings:
1. Press
O
> Settings/Tools > Settings > Sounds > Volume.
2. Select Ringer, Messaging, Alarm, Key Beep, or Advanced,
and press
O
.
3. If you selected Advanced, you can then select
Applications, Calendar, Call Alert, Connected Call, Incoming
W-T, Power On, and Speaker Phone.
4. Follow the prompts to choose a volume level and press
Done (left softkey).
To adjust the ringer, open your phone and use the volume
keys to set the desired level of sound. However, if you are on a
call, pressing the volume keys regulates the sound of the call.
In this case, you can use the volume keys regardless of
whether the phone is opened or closed.
Sound Indicators
Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call, or
when a call has been lost or connected.
To enable or disable alert sounds:
1. Press
O
> Settings/Tools > Settings > Sounds > Indicators.
2. Select Service (Service Change), Minute Beep, Call Lost,
Connect (Call Connect), or New Message and press
O
.
3. Select On or Off and press
O
.
Tip: To reset your volume setting to factory defaults,
press
O
> Settings/Tools > Settings > Sounds > Volume > Reset
Volumes.