Motorola QIP7232 P2 - Manual (Page 3)

2 QIP7232 Quick Start Guide
QIP7200 2
POWER
OK
REC
1 2 3 5 4
1
2
3
4
5 S-Video
Y
Pb
Pr
Optical
Audio
Digital Audio
R
L
Audio
Video Out FiOS TV In 1394
Firewire
RF TV Out Reserved eSATA
IR Remote
Input POWER
Removing card will
disable Set-Top Box.
1 2 3 4 5 7 8 11 13
12 14 15 16 10 9 6
Front Panel
The front panel controls provide functional navigation if the remote control is lost or is temporarily out of service. Certain functions,
such as those requiring a numeric entry, require a remote control. Some connectors are not enabled and require the support of
application software.
Rear Panel
The rear panel contains a power outlet; connectors for video, audio, and RF cabling; data output; and data interface connectors. Some
connectors are not enabled and require the support of application software.
Before You Begin
1 USB connector
2 Cursor — 4-way menu navigation
3 Display Panel
4 Startup Indicator
5 Power — Turns the set-top on and off (standby)
1 FiOS TV In — Connects to FiOS signal from your service provider
2 RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR
3 IEEE-1394 — Audio and video device connection
4 YPbPr — Component video output (HDTV)
5 Audio — Composite Audio L/R outputs
6 Video — Composite Video (SDTV) output
7 Digital Audio (RCA)* — Provides Dolby® Digital 5.1 audio or PCM output
8 Optical Audio (S/PDIF)* — Provides Dolby® Digital 5.1 audio or PCM output
9 S-Video — Connects to S-Video (SDTV) input of TV or VCR
10 IR Remote Input — Connects to a remote control set-top accessory cable
11 HDMI — High-Definition TV (HDTV) connector
12 eSATA* — External Serial ATA disk interface (QIP7200 Only)
13 Ethernet* — Network connection
14 USB* 2.0 — High-Speed peripheral device connection
15 Reserved — Service only
16 Power cord connector — 3-prong AC outlet
*Feature is dependent upon application setting and availability in content