Input signal selection – McAfee 107P User Manual
Page 62
4) Press the
button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN
CONTROLS will be highlighted...
Smart
Help
After returning to MAIN CONTROLS . . .
. . . to continue to INPUT SIGNAL SELECTION, press the
button until INPUT
SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL
SELECTION.
. . . to exit completely, press the
button
INPUT SIGNAL SELECTION (Not available in all models)
INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT A, but if
the video input signal is different that the output signal, you may want to change it to INPUT B.?
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until INPUT SIGNAL SELECTION is highlighted.
3) Press the
button. The INPUT SIGNAL SELECTION window appears.
107P The OSD Controls
file:///G|/manual/english/107P/osd/osd_cont.htm (4 of 32) [10/16/1999 6:30:41 AM]